Impression Epoxy + hardener

1 l / Colourless / Undyed

€64,96

Impression Epoxy + hardener

Floor

Indoors

Water-based

Satin

Back to all products

Impression Epoxy + hardener

€64,96

Colourless water-borne two-pack epoxy primer sealer, odourless and non-flammable. Guarantees excellent binding properties and very good mechanical resistance. Excellent anti-dust coating on bare industrial floors.

Ideal for bare floors subject to mechanical or chemical stress above normal levels (garages, industrial floors…).

Can size

TintUndyed

Selected colour

Download technical datasheet.

Download safety datasheet.

Technical properties

Area of use

Indoors

Aspect

Satin

Spreading rate

6 to 10 m²/l

Touch dry

3 hours

Recoatable

24 hours to 7 days

Equipment cleaning

Water

Area of use

Bare indoor substrates or previously painted with matt paint before applying our EPOXY AQUA :

- Floors made of: concrete, cement coating and derivatives.
- Wall surfaces made of: brick, concrete, cement coating...

Our IMPRESSION EPOXY AQUA is not suited for glossy surfaces (tiles...).

Our IMPRESSION EPOXY AQUA can be applied in areas where food products are used, processed, and handled, in accordance with the Corrigendum to Council Regulation (EC) No 852/2004 of the European Parliament and of the Council on the hygiene of foodstuffs.

Main characteristics

Water-thinnable, odourless and non-flammable.
Excellent fixing properties.
Reinforces powdery surfaces.
Excellent anti-dust coating on bare industrials floors.
Improves the adhesion and open time of finishing coats.
Very good mechanical resistance.
Easy upkeep: washable.

Method of dilution

Dilute our IMPRESSION EPOXY AQUA with 750 ml to 1 litre water per litre of product.

The dilution must occur while mixing the product with the hardener.

Available shades

This product is colourless.

It is strongly discouraged to tint it because the addition of dyes will reduce its chemical and mechanical resistance.

Precautions for use

Beware! If diluting, make sure to adapt the quantity of paint necessary for your work based on the same theoretical spreading rate: 6 to 10 m²/l.

Mixture preparation

This product is a combination of two components. Once combined, stir them mechanically using a round blade mixer mounted on a slow-speed drilling machine. The mixture remains usable for approximately 1.5 hrs. After this time period, the chemical and mechanical properties deteriorate, even if the product has not thickened in the container.

Please note that poor mixing stops the product from drying evenly!